Cel-Fi Quatra
Learn more about maximising the mobile signal in your high-rise or large buildings with the Cel-Fi Quatra. This product can produce high-quality mobile coverage (3G, 4G and 5G) to buildings up to 200,000ft2 / 19,000 m2 in size. Using a distributed antenna system, this powerful device can enhance your mobile signal to make it one thousand times stronger than analogue without signal attenuation throughout the building. Available for EE, O2, Three and Vodafone users.
For more information, contact one of our helpful team members today for a free quote. With each purchase, installation and on-going maintenance is also included. Receive expert help and care with NetCov.
THIS PRODUCT CANNOT BE PURCHASED ONLINE AND REQUIRES A SITE INSPECTION & PRODUCT TRAINING TO COMMISSION. PLEASE CONTACT US FOR A QUOTE.
How does this Cel-Fi Quatra booster work?
The Cel-Fi Quatra antenna is installed on the roof, or an alternative high outdoors position, where the mobile signal is strongest. Installed with a network unit (NU), this device works by amplifying and digitising the mobile signal from as little as 1 bar to up to 5 bars. The system is complete with a network of smaller antennas, which are placed around the building to redistribute the boosted signal.
Structured cabling runs between the booster and the antennas to prevent the loss of signal throughout your building. Using the Ethernet, antennas can be installed anywhere inside the building and will not need to be near a power outlet. This system is able to connect wirelessly with all phones that operate with 3G / 4G / 5G signal.
How is the Cel-Fi Quatra signal booster installed?
The Cel-Fi QUATRA solution consists of a donor antenna which is installed on the roof or outdoors where mobile signal is strongest, a network unit (NU) which amplifies and digitises the mobile signal from as little as 1 bar to up to 5 bars and a network of coverage units (CU’s) which are placed around the building to rebroadcast the boosted signal.
Cat5e/6 structured cabling runs between NU’s and CU’s and prevents the loss of signal at the CU’s. By leveraging power over Ethernet (PoE), CU’s can be installed anywhere in the building as they do not need to be near a power outlet. The system connects wirelessly with all phones that operate with 3G / 4G / 5G signal – there is no need for an internet connection or to pair your device with the Cel-Fi unit.
Why choose NetCov?
We are an industry-leading supplier of the highest quality mobile signal boosters. With each purchase, you’ll be provided with innovative technology that transforms the way you work. We understand that signal disruptions are frustrating, and potentially damaging, for your business. Our team works with you to ensure that you have everything you need to eliminate disruptions and maximise the potential of your signal strength.
With complete installation, ongoing maintenance and specialist advice when you need it, the team at NetCov are ready to help. For more information, you can learn more about who we are or get in touch with one of our helpful team members today.
Scalable Solutions
Cel-Fi QUATRA is a scalable solution that utilises one or multiple Network Units, depending on the environment and size of the space, with up to four distributed Coverage Units connected to each Network Unit.
Off Air Mode
Cel-Fi QUATRA can be installed off-air, using either a MIMO panel or omni donor antenna to provide high-quality inbuilding wireless connectivity. Cel-Fi QUATRA can be deployed by installers or IT personnel with Cat5e skills or who have received Cel-Fi specialist training (no RF engineering skills needed).
Supercell Mode
A Supercell is comprised of a Cel-Fi QUATRA system connected to a small cell. Multiple Cel-Fi QUATRA systems can be connected to a single small cell, or multiple small cells, to form a coordinated Supercell. A Supercell with Cel-Fi QUATRA is more efficient than multiple small cells, and the CUs of a Cel-Fi QUATRA system connected to a Supercell do not interfere with one another.
| Differences of gain | Cel-Fi signal booster | Traditional analogue booster |
| Gains in dB | 100dB (or 1,000x more than the most powerful conventional boosters (70dB)) | Most boosters: 60dB. The more expensive boosters provide up to 70dB, or 1,000 less gain than Cel-Fi |
| Coverage | Up to 50,000 ft2 per system, scalable to 200,000 ft2by combining multiple systems together | Most boosters: 3,000 to 6,500 ft2. The more expensive boosters that require complex indoor antenna installation commonly only provide up to 10,000 ft2. |
This product cannot be purchased online and requires a site inspection & product training to commission. Please contact us for a quote.
- Requires site inspection and installation
- Lowest cost per ft2
- 100dB of signal gain up to 50,000 ft2 / 4,750 m2 per system
- Scalable up to 200,000 ft2 / 19,000 m2 by combining multiple systems
- Carrier approved, boosts 3G and 4G simultaneously
- All digital, RF and Power over Ethernet (PoE) system with cat5/6 structured cabling
- Carrier approved for O2, EE, Three, Vodafone and all Mobile Virtual Network Operators
- Smart Signal Booster with IntelliBoost© Chipset – Unconditionally Network Safe
- Remote monitoring and management with the Cel-Fi WAVE app
- Can be used without a licence, lawful under Ofcom and Comreg regulations
- Supports multiple channels with bandwidths of 3.84/5/10/15/20 MHz per channel
- Peaceful coexistence with adjacent Wi-Fi (2.4 GHz & 5 GHz), femtocells, and cellular devices
- Automatic Gain Control (AGC) based on fast real-time echo-cancellation
- Dynamic gain control always ensures maximum gain — best coverage — in ever changing RF environments, without user intervention
- Enterprise-class, carrier-grade, small footprint active DAS
The Cel-Fi commitment is to protect the operator’s network, deliver the best in-building mobile performance, and be the easiest solution to install.
Cel-Fi products are licence-exempt and fully comply with Ofcom’s UK Interface requirement 2102 (IR2102) (UK) and ComReg S.I.No.283 of 2018 (Ireland).
Network Safe
Self-organising edge intelligence ensures that Cel-Fi QUATRA do not interfere with other indoor wireless products such as Wi-Fi routers, Small Cells, and Distributed Antenna Systems (DAS).
High speed Automatic Gain Control ensures that Cel-Fi QUATRA are unconditionally network safe and enables more simultaneous calls and higher data speeds.
Activate, Optimize, and Manage Cel-Fi products with the Cel-Fi WAVE App
Cel-Fi WAVE is the software application used for registering, setting-up, remotely monitoring, and updating Cel-Fi products.
It provides a glance-able view to the state of your Cel-Fi environment and includes:
- A dashboard overview of all your systems
- Real-time data and performance metrics
- Easy activation and registration
- Operator changeover if you switch your network
- Software update management
- Users and group management
The Cel-Fi WAVE App is available for iOS, Android, PC and Mac devices.
*This unit supports multiple networks however only one network can be used at a time. The WAVE App can be used to switch between mobile networks.
For customers in Hebrides, Scottish Isles, Highlands and other remote areas in the UK: Due to Ofcom licence exemption rules, it is not permitted to relay 4G only signal. Please check on your service provider’s coverage map, entering your postcode, to make sure you have Outdoor 3G Coverage in your area before purchasing. The current checker websites are: EE, O2, Three, Vodafone.
- List items
- Cel-Fi Quatra Leaflet
- Cel-Fi Quatra Data Sheet
- Cel-Fi Quatra Quick Start Guide
Recommended
